The store will not work correctly when cookies are disabled.
Due to Microsoft's discontinuation of updates, including security, certain functionality such as checkout and CAD may not work for you. We recommend using Google Chrome, Microsoft Edge, Firefox, or Safari to ensure full functionality.Thank you - the Ruland team
Large jaw couplings are now being offered for bore sizes up to 1-3/4” or 45 mm and torque capacities of 2,655 in-lbs (300 Nm). These new large jaw couplings are designed for use in precision systems with high deceleration and acceleration curves, such as those found in semiconductor, solar, conveyor, and warehouse automation applications.
Pre-assembled modular mounting systems are designed for adjustability across many mounting applications. Conveyor mounting systems emphasize strict parallel installation using a flange-bolt base and a conveyor rail guide. Sensor mounting systems offer flexibility in a mounting application with adjustable or 90-degree connectors, two-way bases, and various mounting brackets. Both systems include stainless steel rods (with or without scale) from 100mm to 300mm in length, zinc clamping levers, and connectors that allow adjustment of the rods’ position.
Mountable shaft collars with face holes are designed to mate directly with components such as sprockets, pulleys, and metallic plates. Ruland manufactures them with drilled holes for mounting flexibility or threaded holes for the most secure connection between the collar and mated component. They are offered in steel, aluminum, and 303 stainless steel in bore sizes ranging from 3/8” to 2” and 10mm to 50mm.
Ruland offers two types of quick clamping shaft collars – with cam lever and with clamping lever – which require no tools for installation, adjustment, or removal. Quick clamping shaft collars with cam lever have an integral lever that sits flush with the outside diameter and is finger actuated. The design features a tension-adjustment screw that can be adjusted to tailor axial holding power to application needs. Quick clamping shaft collars with cam lever are one-piece clamp style and require shaft end access to install properly. They are best suited for light duty and low RPM applications where frequent change outs of items including media, guide rails, or other setup fixturing is required. Ruland manufactures handles in 6063 aluminum and bodies in 6061 aluminum with bore sizes from 1/4" (6mm) to 3” (75mm).
Quick clamping shaft collars with clamping lever feature a Ruland manufactured shaft collar combined with an adjustable clamping lever that replaces standard hardware. This creates a shaft collar with a ratcheting handle that can easily be installed, removed, or repositioned without tools. They have the benefits of traditional Ruland shaft collars such as not marring the shaft, tightly controlled face to bore perpendicularity (TIR of ≤ .002" or 0.05mm), and a fine burr-free finish allowing them to be used in a wide range of packaging applications. The shaft collar is offered in standard materials including: 1215 lead-free steel with a black oxide or zinc plated finish, 303 and 316 stainless steel, high strength 2024 aluminum, and engineered plastic. The lever is sourced from JW Winco and features a zinc plated handle with a stainless steel threaded stud and internal components.
