Due to Microsoft's discontinuation of updates, including security, certain functionality such as checkout and CAD may not work for you. We recommend using Google Chrome, Microsoft Edge, Firefox, or Safari to ensure full functionality.Thank you - the Ruland team
Large jaw couplings are now being offered for bore sizes up to 1-3/4” or 45 mm and torque capacities of 2,655 in-lbs (300 Nm). These new large jaw couplings are designed for use in precision systems with high deceleration and acceleration curves, such as those found in semiconductor, solar, conveyor, and warehouse automation applications.
Explore More >>Pre-assembled modular mounting systems are designed for adjustability across many mounting applications. Conveyor mounting systems emphasize strict parallel installation using a flange-bolt base and a conveyor rail guide. Sensor mounting systems offer flexibility in a mounting application with adjustable or 90-degree connectors, two-way bases, and various mounting brackets. Both systems include stainless steel rods (with or without scale) from 100mm to 300mm in length, zinc clamping levers, and connectors that allow adjustment of the rods’ position.
Explore More >> Mountable shaft collars with face holes are designed to mate directly with components such as sprockets, pulleys, and metallic plates. Ruland manufactures them with drilled holes for mounting flexibility or threaded holes for the most secure connection between the collar and mated component. They are offered in steel, aluminum, and 303 stainless steel in bore sizes ranging from 3/8” to 2” and 10mm to 50mm.
Explore More >> 
| Dimensions | |||
|---|---|---|---|
|
Bore (B1) Larger inner diameter. Should match nominal shaft diameter. |
1.0000 in |
Small Bore (B2) Smaller inner diameter. Should match nominal shaft diameter. |
1.0000 in |
|
B1 Max Shaft Penetration The maximum depth the shaft can penetrate into Bore B1. |
1.700 in |
B2 Max Shaft Penetration The maximum depth the shaft can penetrate into Bore B2. |
1.700 in |
|
Joint Outer Diameter (OD) |
1.995 in |
Bore Tolerance Variance in finished bore range before installation. |
+0.0010 in / -0.0000 in |
|
Length (L) |
8.688 in |
Center Yoke Length (LC) |
3.188 in |
|
Yoke Length (LY) |
2.750 in |
Hub Depth (LH) |
1.700 in |
| Performance Specifications | |||
|
Peak Torque The torque where the universal joint will break. |
19350 in-lb |
Rated Torque Recommended torque based on slippage on the shaft. |
3,870 in-lb |
|
Max Operating Angle |
90° |
||
| Additional Information | |||
|
Material Specification |
Alloy Steel |
Manufacturer |
Belden Universal |
|
Country of Origin |
USA |
Weight (lbs) |
5.320000 |
|
Recommended Lubricant |
LUBRIPLATE No. 1200-2 |
Matching Boot Cover |
|
|
UPC |
634529288689 |
Tariff Code |
8483.60.4000 |
|
UNSPC Code used to identify products to standardize nomenclature around the world. |
25173810 |
||
| Product Notes | |||
|
Note 1 |
Performance ratings are for guidance only. The user must determine suitability for a particular application. |
|
|
WARNING This product can expose you to the chemical Ethylene Thiourea, known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to 
