The store will not work correctly when cookies are disabled.
Due to Microsoft's discontinuation of updates, including security, certain functionality such as checkout and CAD may not work for you. We recommend using Google Chrome, Microsoft Edge, Firefox, or Safari to ensure full functionality.Thank you - the Ruland team
Large jaw couplings are now being offered for bore sizes up to 1-3/4” or 45 mm and torque capacities of 2,655 in-lbs (300 Nm). These new large jaw couplings are designed for use in precision systems with high deceleration and acceleration curves, such as those found in semiconductor, solar, conveyor, and warehouse automation applications.
Pre-assembled modular mounting systems are designed for adjustability across many mounting applications. Conveyor mounting systems emphasize strict parallel installation using a flange-bolt base and a conveyor rail guide. Sensor mounting systems offer flexibility in a mounting application with adjustable or 90-degree connectors, two-way bases, and various mounting brackets. Both systems include stainless steel rods (with or without scale) from 100mm to 300mm in length, zinc clamping levers, and connectors that allow adjustment of the rods’ position.
Mountable shaft collars with face holes are designed to mate directly with components such as sprockets, pulleys, and metallic plates. Ruland manufactures them with drilled holes for mounting flexibility or threaded holes for the most secure connection between the collar and mated component. They are offered in steel, aluminum, and 303 stainless steel in bore sizes ranging from 3/8” to 2” and 10mm to 50mm.
Ruland SC-16-F/5PK is a 5 pack of set screw shaft collars, each with a 1.0000" bore, 1 5/8" OD, and 0.625" width. These set screw shaft collars are commonly used for guiding, spacing, stopping, and component alignment in light duty applications where the collar is infrequently repositioned or removed. Holding power is derived from the screw as it is tightened onto the shaft. In order for the collar to obtain maximum holding power the shaft must be softer than the material of the screw. Proprietary processes have been developed by Ruland to maintain superior fit, finish, and holding power. All shaft collars in this pack are stamped with the Ruland name and bore size for ease of identification. Forged screws test beyond DIN 912 12.9 standards to ensure maximum holding power. The shaft collars in this pack are machined from solid bar stock to a fine burr free finish and sourced exclusively from North American mills. Ruland uses 1215 lead-free steel with a proprietary black oxide finish that produces a fine glossy finish while increasing holding power and resisting corrosion. Shaft collars in SC-16-F/5PK are RoHS3 and REACH compliant and manufactured in our Marlborough, MA factory under strict controls using proprietary processes.
PRODUCT SPECIFICATIONS
Dimensions
Bore (B1)
Larger inner diameter. Should match nominal shaft diameter.
1.0000 in
Width (W)
0.625 in
Outer Diameter (OD)
1 5/8 in
Width Tolerance
+0.003 in / -0.010 in
Bore Tolerance
Variance in finished bore range before installation.
+0.0020 in / +0.0005 in
Recommended Shaft Tolerance
Acceptable variance in nominal shaft diameter before performance loss.
+0.0000 in / -0.0005 in
Fastening Hardware
Forged Set Screw
Inch or metric socket head set screw size.
5/16-18 x 5/16
Screw Material
Alloy Steel
Hex Wrench Size
Wrench size that fits the screw head to tighten or loosen the screw.
5/32 in
Screw Finish
Surface finish and treatments on supplied hardware.
Black Oxide
Seating Torque
Torque required to install supplied hardware. Use torque wrench for accurate seating torque.
165 lb-in
Number of Screws
1 ea
Additional Information
Material Specification
1215 Carbon Steel Bar
Multipack Quantity
5
Temperature
Minimum and maximum operating temperature. Operating temperature includes ambient temperature plus or minus factors such as system heat generated during operation, washdown, vacuum, etc...
-40°F to 350°F (-40°C to 176°C)
Country of Origin
USA
Manufacturer
Ruland Manufacturing
Weight (lbs)
1.106100
Tariff Code
8483.60.8000
UPC
634529314562
Product Notes
Note 1
This product has been discontinued as a standard item. Please inquire for special pricing.
Note 2
Performance ratings are for guidance only. The user must determine suitability for a particular application.
Prop 65
Required for the US State of California only.
product_weight=10,WARNING This product can expose you to the chemical Ethylene Thiourea
WARNING This product can expose you to the chemical Ethylene Thiourea
