Due to Microsoft's discontinuation of updates, including security, certain functionality such as checkout and CAD may not work for you. We recommend using Google Chrome, Microsoft Edge, Firefox, or Safari to ensure full functionality.Thank you - the Ruland team
Large jaw couplings are now being offered for bore sizes up to 1-3/4” or 45 mm and torque capacities of 2,655 in-lbs (300 Nm). These new large jaw couplings are designed for use in precision systems with high deceleration and acceleration curves, such as those found in semiconductor, solar, conveyor, and warehouse automation applications.
Explore More >>Pre-assembled modular mounting systems are designed for adjustability across many mounting applications. Conveyor mounting systems emphasize strict parallel installation using a flange-bolt base and a conveyor rail guide. Sensor mounting systems offer flexibility in a mounting application with adjustable or 90-degree connectors, two-way bases, and various mounting brackets. Both systems include stainless steel rods (with or without scale) from 100mm to 300mm in length, zinc clamping levers, and connectors that allow adjustment of the rods’ position.
Explore More >> Mountable shaft collars with face holes are designed to mate directly with components such as sprockets, pulleys, and metallic plates. Ruland manufactures them with drilled holes for mounting flexibility or threaded holes for the most secure connection between the collar and mated component. They are offered in steel, aluminum, and 303 stainless steel in bore sizes ranging from 3/8” to 2” and 10mm to 50mm.
Explore More >> Ruland flanged bolt bases are used with mini-clamp tube connectors to function as feet or work-holding flanges. The width of the bolt can be 8mm to 20mm and is designed to fit hollow round tubes and the bores in any tube connectors. The flanged bolt bases have two drill holes that fit with our portable magnet bases to facilitate rapid repositioning of modular mounting systems. All flanged bolt bases are manufactured from zinc plated steel for corrosion resistance and stability.
Ruland one-way base mounts have one square or round bore ranging in size from 8mm to 20mm allowing for a single clamping connection. The one-way mounting base comes standard with two drill holes that match the drill hole spacing of Ruland mounting and portable magnet bases. Designers can select a standard socket head cap screw or add a clamping lever kit to clamp the square or round tube in place. Ruland one-way mounting bases are available in aluminum with a plain or black anodized finish.
The swivel clamp base is typically combined with swivel clamp tube connectors to make swivel clamp mounting joints. Designers can then add tubes and build onto the mounting system. The rounded edges of the swivel clamp base allow tubes and rods to be constructed with flexibility in confined spaces. The drill hole spacing of the swivel base fits with Ruland portable magnet bases to facilitate rapid repositioning. Swivel bases are available in aluminum with a plain or black anodized finish.
Two-way tube connector bases are typically used as a base in support structures for mounting sensors, plexiglass guards, cameras, and countless other applications. They have vertical and horizontal bores that are designed to fit square and round tubes with an outside diameter of 8mm to 20mm. Tubes are clamped into place with socket cap screws that can be replaced with clamping lever kits if frequent movement of tubes is required. The drill hole spacing of the two-way base fits with Ruland portable magnet bases which are used to easily move the modular mounting system around. Our two-way bases are available in aluminum with a plain or black anodized finish.
