The store will not work correctly when cookies are disabled.
Due to Microsoft's discontinuation of updates, including security, certain functionality such as checkout and CAD may not work for you. We recommend using Google Chrome, Microsoft Edge, Firefox, or Safari to ensure full functionality.Thank you - the Ruland team
Large jaw couplings are now being offered for bore sizes up to 1-3/4” or 45 mm and torque capacities of 2,655 in-lbs (300 Nm). These new large jaw couplings are designed for use in precision systems with high deceleration and acceleration curves, such as those found in semiconductor, solar, conveyor, and warehouse automation applications.
Pre-assembled modular mounting systems are designed for adjustability across many mounting applications. Conveyor mounting systems emphasize strict parallel installation using a flange-bolt base and a conveyor rail guide. Sensor mounting systems offer flexibility in a mounting application with adjustable or 90-degree connectors, two-way bases, and various mounting brackets. Both systems include stainless steel rods (with or without scale) from 100mm to 300mm in length, zinc clamping levers, and connectors that allow adjustment of the rods’ position.
Mountable shaft collars with face holes are designed to mate directly with components such as sprockets, pulleys, and metallic plates. Ruland manufactures them with drilled holes for mounting flexibility or threaded holes for the most secure connection between the collar and mated component. They are offered in steel, aluminum, and 303 stainless steel in bore sizes ranging from 3/8” to 2” and 10mm to 50mm.
Ruland JD44/70-92Y is a zero-backlash jaw coupling spider designed to fit Ruland hubs that have an 2.750" (69.9mm) OD. It is a component in a three-piece design consisiting of two aluminum hubs and an elastomeric insert called the spider creating a lightweight low inertia coupling capable of speeds up to 8,000 RPM. This three-piece design allows for a highly customizable coupling that easily combines clamp or set screw hubs with inch, metric, keyed, and keyless bores. JD44/70-92Y is made from polyurethane and has 92 Shore A hardness allowing for a good balance of dampening and torque capacity. Ruland jaw couplings have a balanced design for reduced vibration at high speeds. Hardware is metric and tests beyond DIN 912 12.9 standards for maximum torque capabilities. JD44/70-92Y is RoHS3 and REACH compliant.
PRODUCT SPECIFICATIONS
Dimensions
Outer Diameter (OD)
2.750 in (69.9 mm)
Performance Specifications
Rated Torque
Recommended torque based on slippage on the shaft.
300 in-lb (33.9 Nm)
Angular Misalignment
Max angle of the shaft axes relative to each other.
0.9°
Peak Torque
The torque where the insert will permanently deform and lose elasticity. This will result in loss of zero-backlash.
600 in-lb (67.79 Nm)
Parallel Misalignment
Shafts are parallel to each other, but not in-line with each other. They are offset.
0.008 in (0.20 mm)
Torsional Stiffness
Measures the rigidity of the coupling. The more rigid the coupling, the less windup it will have.
500 lb-in/Deg (56.49 Nm/Deg)
Moment of Inertia
0.113995 lb-in2 (3.336 X 10-5 kg-m2)
Axial Motion
The amount shafts can move closer to or away from each other. This is meant for thermal expansion of the shafts. No axial force can be placed on the coupling.
0.060 in (1.52 mm)
Maximum Speed
8,000 RPM
Full Bearing Support Required?
Full bearing support is a bearing in close proximity to both sides of the coupling to prevent axial loads that could result in rapid coupling failure.
Yes
Zero-Backlash?
Zero-backlash ensures there is no loss of motion during operation.
Yes
Approximate Assembly Force (lbf)
Amount of force estimated to assemble the spider into a jaw coupling hub(s).
140 lbf
Bearing Load at Max Parallel Misalignment (lbf)
65 lbf
Additional Information
Weight (lbs)
0.128900
Temperature
Minimum and maximum operating temperature. Operating temperature includes ambient temperature plus or minus factors such as system heat generated during operation, washdown, vacuum, etc...
UNSPC
Code used to identify products to standardize nomenclature around the world.
31163011
Product Notes
Note 1
Performance ratings are for guidance only. The user must determine suitability for a particular application.
Note 2
Torque ratings for the couplings are based on the physical limitations/failure point of the spiders. Under normal/typical conditions the hubs are capable of holding up to the nominal torque of the spiders. In some cases especially when the smallest standard bores are used or where shafts are undersized slippage on the shaft is possible below the nominal torque of the spiders. Keyways are available to provide additional torque capacity in the shaft/hub connection when required. Please consult technical support for more assistance.
