Due to Microsoft's discontinuation of updates, including security, certain functionality such as checkout and CAD may not work for you. We recommend using Google Chrome, Microsoft Edge, Firefox, or Safari to ensure full functionality.Thank you - the Ruland team
Large jaw couplings are now being offered for bore sizes up to 1-3/4” or 45 mm and torque capacities of 2,655 in-lbs (300 Nm). These new large jaw couplings are designed for use in precision systems with high deceleration and acceleration curves, such as those found in semiconductor, solar, conveyor, and warehouse automation applications.
Explore More >>Pre-assembled modular mounting systems are designed for adjustability across many mounting applications. Conveyor mounting systems emphasize strict parallel installation using a flange-bolt base and a conveyor rail guide. Sensor mounting systems offer flexibility in a mounting application with adjustable or 90-degree connectors, two-way bases, and various mounting brackets. Both systems include stainless steel rods (with or without scale) from 100mm to 300mm in length, zinc clamping levers, and connectors that allow adjustment of the rods’ position.
Explore More >> Mountable shaft collars with face holes are designed to mate directly with components such as sprockets, pulleys, and metallic plates. Ruland manufactures them with drilled holes for mounting flexibility or threaded holes for the most secure connection between the collar and mated component. They are offered in steel, aluminum, and 303 stainless steel in bore sizes ranging from 3/8” to 2” and 10mm to 50mm.
Explore More >> Ruland CL-10-A, 5/8" One-Piece Shaft Collar, Aluminum, Clamp Style, 1 5/16" OD, 0.437" Width
Ruland CL-10-A is a one-piece shaft collar with a 0.6250" bore, 1 5/16" OD, and 0.437" width. The clamp style design does not mar the shaft, is easy to remove, and is indefinitely adjustable. It is commonly used for guiding, spacing, stopping, mounting, and component alignment. Equipment manufacturers benefit from the tightly controlled face to bore perpendicularity (TIR of ≤ .002"). Perpendicularity is critical for alignment when the shaft collar is used as a load bearing face, mechanical stop, or for mounting components such as gears or bearings. Proprietary processes have been developed by Ruland to maintain superior fit, finish, and holding power. CL-10-A is stamped with the Ruland name and bore size for ease of identification. Forged screws test beyond ANSI standards to ensure maximum holding power. CL-10-A is manufactured from solid bar stock sourced from select North American mills and machined to a fine burr free finish. Ruland uses high grade 2024 aluminum for increased screw seating torque. CL-10-A is RoHS3 and REACH compliant and manufactured in our Marlborough, MA factory under strict controls using proprietary processes.
| Dimension | |||
|---|---|---|---|
|
Bore (B1) Larger inner diameter. Should match nominal shaft diameter. |
0.6250 in |
Bore Tolerance Variance in finished bore range before installation. |
+0.0020 in / +0.0005 in |
|
Outer Diameter (OD) |
1 5/16 in |
Clearance Diameter (C) MAX Minimum diameter required to avoid interference with hardware. |
1.500 in |
|
Width (W) |
0.437 in |
Width Tolerance |
+0.003 in / -0.010 in |
|
Recommended Shaft Tolerance Acceptable variance in nominal shaft diameter before performance loss. |
+0.0000 in / -0.0005 in |
||
| Fastening Hardware | |||
|
Forged Clamp Screw Inch or metric socket head cap screw size. |
#10-32 |
Screw Material |
Alloy Steel |
|
Hex Wrench Size Wrench size that fits the screw head to tighten or loosen the screw. |
5/32 in |
Screw Finish Surface finish and treatments on supplied hardware. |
Black Oxide |
|
Seating Torque Torque required to install supplied hardware. Use torque wrench for accurate seating torque. |
76 lb-in |
Screw Location (R) |
0.479 in |
|
Number of Screws |
1 ea |
||
| Additional Information | |||
|
Material Specification |
2024-T351 Aluminum Bar |
Bright, No Plating |
|
|
Manufacturer |
Ruland Manufacturing |
Country of Origin |
USA |
|
Temperature Minimum and maximum operating temperature. Operating temperature includes ambient temperature plus or minus factors such as system heat generated during operation, washdown, vacuum, etc... |
-40°F to 225°F (-40°C to 107°C) |
Weight (lbs) |
0.046600 |
|
UPC |
634529000014 |
Tariff Code |
8483.60.8000 |
|
UNSPC Code used to identify products to standardize nomenclature around the world. |
31162811 |
||
| Product Notes | |||
|
Note 1 |
Performance ratings are for guidance only. The user must determine suitability for a particular application. |
|
|
| CERTIFICATIONS/STANDARDS | |||
|---|---|---|---|
| ISO 9001:2015 | Conflict Minerals | ||
| RoHS3 | REACH | ||
WARNING This product can expose you to the chemical Ethylene Thiourea, known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to 
