The store will not work correctly when cookies are disabled.
Due to Microsoft's discontinuation of updates, including security, certain functionality such as checkout and CAD may not work for you. We recommend using Google Chrome, Microsoft Edge, Firefox, or Safari to ensure full functionality.Thank you - the Ruland team
Large jaw couplings are now being offered for bore sizes up to 1-3/4” or 45 mm and torque capacities of 2,655 in-lbs (300 Nm). These new large jaw couplings are designed for use in precision systems with high deceleration and acceleration curves, such as those found in semiconductor, solar, conveyor, and warehouse automation applications.
Pre-assembled modular mounting systems are designed for adjustability across many mounting applications. Conveyor mounting systems emphasize strict parallel installation using a flange-bolt base and a conveyor rail guide. Sensor mounting systems offer flexibility in a mounting application with adjustable or 90-degree connectors, two-way bases, and various mounting brackets. Both systems include stainless steel rods (with or without scale) from 100mm to 300mm in length, zinc clamping levers, and connectors that allow adjustment of the rods’ position.
Mountable shaft collars with face holes are designed to mate directly with components such as sprockets, pulleys, and metallic plates. Ruland manufactures them with drilled holes for mounting flexibility or threaded holes for the most secure connection between the collar and mated component. They are offered in steel, aluminum, and 303 stainless steel in bore sizes ranging from 3/8” to 2” and 10mm to 50mm.
Jaw Couplings for Medical & Lab Analysis Equipment
Ruland jaw couplings consist of two lightweight aluminum hubs and a center elastomeric element called the spider. Hubs are machined with a proprietary process to produce a curved jaw profile that press fits with the spider allowing for consistent zero-backlash operation. The spider dampens impulse loads to minimize shock to the motor and other sensitive system components such as bearings. This is particularly useful in applications with high acceleration/deceleration curves often found in optical inspection and analytical equipment such as chromatographers. The spider is available in three durometers allowing the designer to balance dampening capabilities with torque, misalignment and torsional stiffness based on the needs of the system. Zero-backlash jaw couplings are considered fail safe because the spider serves as the wear element – if it fails the jaws of the two hubs interlock for continued power transmission. The application can then be safely shut down for maintenance rather than stopping suddenly. Spiders can be replaced to restore the original performance characteristics of the coupling leading to reduced maintenance costs when compared to other coupling styles that require complete replacement when at the end of their usable life. Bores are available in sizes from 1/8” to 1-1/4” and 3mm to 32mm. The three piece design lets the designer mix and match clamp or set screw hubs with inch, metric, or keyless bores making it easier to tailor the coupling to specific system requirements. Ruland jaw couplings are manufactured in our Marlborough, MA factory under strict control using proprietary processes.
